SunClean LED 5 dezinfekcinė lempa 4000K
55.00 €
Bazinės savybės:
- Išmatavimai 174x35mm
- Spalvos temperatūra 4000K (neutraliai balta)
- Dezinfekuoja orą ir paviršius
- Lempos tipas įleidžiama
Pristatymas 3-7 d.d. visoje Lietuvoje.
Aprašymas
Integruota UV-C dezinfekcija su LED apšvietimu. Ši precendento neturinčių sveikatą saugančių apšvietimo produktų serija leidžia naudoti paviršių dezinfekciją, oro valymą ir apšvietimą. Dezinfekcijos efektyvumas yra iki 99,9%- be pernelyg didelės spinduliuotės, ozono susidarymo ir cheminių likučių.
Papildoma informacija
Dalys ir priedai
Teleskopinė rankena WG801E, Worx
Atsiliepimai (0)
Rašyti atsiliepimą gali tik prisijungę pirkėjai, kurie yra įsigiję šį produktą.
Klausimai ir atsakymai(0)
Panašūs produktai
Fibaro Smart Module, Z-Wave Plus EU
Works with various types of switches and buttons; Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption; Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network); May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers
Fibaro Walli Outlet (type F) Z-Wave EU White
FIBARO Walli Outlet is an intelligent power outlet which is used to control the connected electronic devices. So you will never have to worry about a switched on coffee machine or ponder whether you have actually switched off the lamp. The small FIBARO Walli Outlet measures active power and energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included socket cover, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own socket series (GIRA System 55**, Legrand Celiane, Schneider Odace).
Fibaro Walli Switch Z-Wave EU White
The FIBARO Walli Switch is a small flush-mounted module combined with an optically appealing switch which can be used to switch one or two light sources. So you can switch off the light even when you are not at home. The small FIBARO Walli Switch measures the active power and the energy consumption. With its LED ring you are informed about the current energy consumption. The installation is easy and can be carried out according to your individual wishes. Use the included switch, which was inspired by the timeless elegance and flowing appearance of a pearl, or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace). The FIBARO Walli Switch can be used for the following luminaires: conventional incandescent lamps and halogen lamps, LED lamps, fluorescent lamps, electronic transformers (for ELV halogen lamps and LED light bulbs), ferromagnetic transformers (for MLV halogen lamps).
Fibaro Swipe Z-Wave White
Main features of FIBARO Swipe: • Radio protocol Z-Wave Plus • Compatible with any Z-Wave or Z-Wave+ Controller. • Supports protected mode (Z-Wave network security mode) with AES-128 encryption. • Allows for contactless gesture detection. • Battery or VDC powered. When connected to an external VDC power source the battery serves as an emergency power source. • Gestures and actions are confirmed by the buzzer and can be indicated additionally by the built-in LED diode. • Gesture controlled menu allows to operate the device without dismantling it.
Atgal 
Atsiliepimai
Atsiliepimų dar nėra.